H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Simple Network Management Protocol Configuration
Managing the SNMP Version 3 Configuration
132 59272-00 C
Modify an SNMP Version 3 User Account
To modify an SNMP version 3 user account, enter the Snmpv3user Edit command
as shown in the following example:
H3C #> admin start
H3C (admin) #> snmpv3user edit
A list of SNMPV3 user attributes with formatting and current attribute
values for the specified SNMPV3 user will follow.
Enter a new value OR simply press the ENTER key where-ever allowed to
accept the current value.
If you wish to terminate this process before reaching the end of the list,
press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.
Username (8-32 chars) : snmpuser1
Group (0=ReadOnly, 1=ReadWrite) [ReadWrite ] : 1
Authentication (True/False) [True ] : f
Do you want to save and activate this setup ? (y/n): [n] n
SNMPV3 user account edited and activated.