H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Simple Network Management Protocol Configuration
Displaying SNMP Information
59272-00 C 127
Displaying SNMP Information
Enter the Show Setup SNMP command to display SNMP configuration
information as shown in the following example. Refer to Table 25 for a description
of the SNMP parameters.
H3C #> show setup snmp
SNMP Information
----------------
SNMPEnabled True
Contact <sysContact undefined>
Location <sysLocation undefined>
Description 4-port FC media card
ObjectID 1.3.6.1.4.1.3873.1.27
AuthFailureTrap True
ProxyEnabled True
SNMPv3Enabled False
Trap1Address 10.0.0.254
Trap1Port 162
Trap1Severity warning
Trap1Version 2
Trap1Enabled False
Trap2Address 0.0.0.0
Trap2Port 162
Trap2Severity warning
Trap2Version 2
Trap2Enabled False
Trap3Address 0.0.0.0
Trap3Port 162
Trap3Severity warning
Trap3Version 2
Trap3Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap4Version 2
Trap4Enabled False
Trap5Address 0.0.0.0
Trap5Port 162
Trap5Severity warning
Trap5Version 2
Trap5Enabled False