H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Call Home Configuration
Resetting the Call Home Database
124 59272-00 C
Resetting the Call Home Database
There are two ways to reset the Call Home database. Enter the Callhome Clear
command to clear all Callhome profiles as shown in the following example.
H3C #> admin start
H3C (admin) #> callhome edit
H3C (admin-callhome) #> callhome clear
H3C (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
Enter the Reset Callhome command to clear all Call Home profiles and Call Home
service configuration to the factory defaults as shown in the following example:
H3C #> admin start
H3C (admin) #> reset callhome
The callhome configuration will be reset and the default values activated.
Please confirm (y/n): [n] y
Reset and activation in progress ....