H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Call Home Configuration
Call Home Concepts
114 59272-00 C
The following is an example of a full-text e-mail including profile and SNMP
contact information:
From: [e-mail] [mailto:[e-mail]]
Sent: Wednesday, July 25, 2007 5:03 PM
Subject: [CallHome: Test] Alarm generated on Switch_8
------------ Event Details
SwitchName: Switch_8_83.215
SwitchIP: 10.20.30.40
SwitchWWN: 10:00:00:c0:dd:0c:66:f2
Level: Alarm
Text: CALLHOME TEST PROFILE MESSAGE
ID: 8B00.0002
Time: Wed Jul 25 17:02:40.343 CDT 2007
------------ Switch Location
Room 123; Rack 9; Bay 3
------------ Contact Information
George Smith
12345 4th Street, City, State
952-999-9999
[e-mail]
Technical Support Interface
You can collect and send switch status and trend data periodically by e-mail to
specified technical support resources. The Capture command enables you to add
instructions to the a profile to specify the frequency with which to e-mail this data.
For more information, refer to “Adding a Data Capture Configuration” on
page 9-122.