H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

59272-00 C xi
Preface
This guide describes the features and use of the command line interface for the
H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches running
firmware version 9.0.7. This product is referred to as the Switch Module
throughout this guide. The Switch Module is a fully integrated Ethernet, Fibre
Channel, and FCoE switch module.
This guide is organized as follows:
 This preface describes the Switch Module and features, the intended
audience, related materials, and technical support.
 Section 1 describes logging on and off of a Switch Module, opening and
closing an Admin session, entering commands, getting help, paging a
Switch Module, setting page breaks, and loading and retrieving files.
 Section 2 describes the management of user accounts and passwords.
 Section 3 describes configuring the Switch Module network connection.
 Section 4 describes managing the Switch Module configuration, setting the
date and time, backing up and restoring the switch configuration, resetting
the Switch Module, and installing firmware.
 Section 5 describes port configurations, resetting a port, initializing a port
loop, configuring port threshold alarms, and testing ports.
 Section 6 describes managing connection security.
 Section 7 describes managing the Remote Authentication Dial-In User
Service (RADIUS) server.
 Section 8 describes events and event logging.
 Section 9 describes the Call Home service.
 Section 10 describes managing the Simple Network Management Protocol
(SNMP) configuration.
 Section 11 lists the commands in alphabetical order, including the command
syntax, keywords, notes, and examples.
An index is also provided.