H3C LSW1FC4P0 Interface Card for S5820X-28C Ethernet Switches Command Line Interface Guide Firmware Version 9.0.7

Port Configuration
Modifying Port Operating Characteristics
88 59272-00 C
.
PrimaryTFPortMap [0,1,2,3 ]0,2,3
H3C (admin-config) #> set config port 5
.
.
.
PrimaryTFPortMap [0,1,2,3 ]0,2,3
H3C (admin-config) #> set config port 6
.
.
.
PrimaryTFPortMap [0,1,2,3 ]0,2,3
H3C (admin-config) #> set config port 7
.
.
.
PrimaryTFPortMap [0,1,2,3 ]0,2,3
3. Enter the Set Config Port command for external port (1) and the
corresponding internal port (5) and change the PortType to PT.
H3C (admin-config) #> set config port 1
.
.
.
PortType (PT,TF) [TF ] PT
H3C (admin-config) #> set config port 5
.
.
.
PortType (PT,TH) [TH ] PT
4. Enter the Config Save and Config Activate commands to save and activate
the new configuration.
H3C (admin-config) #> config save
H3C (admin) #> config activate
NOTE:
If the internal port is not connected to the Ethernet, the corresponding
internal port will change state to Down. The internal port will return to
Online when the flex port is connected.