3X-KZPEA Release Notes, June 2006

3) Perform the following steps in the configuration utility on both AlphaServer systems:

h) Select the channel (1/A or 2/B) that will be configured in a shared bus environment.

i) Select "Configure/View Host Adapter Settings" menu.

j) Use the arrow key to move the cursor to Host Adapter SCSI Termination, and then press RETURN

to select your options.

k) Set Host Adapter SCSI Termination = “Low OFF/High OFF” if channel 1/A was selected, or

“Disabled” if channel 2/B was selected. [NOTE: B channel has different settings than A channel]

l) On one of the shared bus AlphaServer systems, change its KZPEA SCSI ID field to 6 (default is 7)

for the appropriate channel being configured into a shared bus environment.

m) Press Esc key to get out and save the changes.

n) Press Esc key again to exit the configuration utility. The console will reset all I/O buses.

The information contained herein is subject to change without notice. The only warranties for HP products and

services are set forth in the express warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.

Printed in the U.S.A.