HP ProCurve Series 6120 Blade Switches IPv6 Configuration Guide

Command Min. Level Page
Authorized Manager
ipv6 authorized managers < ipv6-addr >
* Global Config 6-5
show ipv6 authorized-managers Manager 6-12
Copy
auto-tftp Global Config 5-22
copy tftp < target > < ipv6-addr > < filename > Manager 5-19
copy < source > tftp < ipv6-addr > < filename > Manager 5-20
tftp6 [ client | server ] Global Config 5-18
Debug/Syslog
debug ipv6 < dhcpv6-client | nd > Manager 7-12
logging < syslog-ipv4-addr > Global Config 7-14
Diagnostic
ping6 Operator 7-2
traceroute6 Operator 7-5
DNS
ip dns domain-name < domain-name-str > Global Config 7-9
ip dns server-address priority < 1 - 3 > < ipv6-addr >
* Global Config 7-8
IPv6 Addressing
ipv6 address autoconfig VLAN Config 4-7
ipv6 address dhcp full [ rapid-commit ] VLAN Config 4-9
ipv6 address fe80::< device-id > link-local VLAN Config 4-12
ipv6 address < ipv6-addr >/< prefix-len > VLAN Config 4-13
ipv6 address < ipv6-addr >/< prefix-len > eui-64 VLAN Config 4-13
ipv6 address < ipv6-addr >/< prefix-len > anycast VLAN Config 4-15
show ipv6 Operator 4-22
show ipv6 vlan < vid > Operator 4-24
IPv6 Management
clear ipv6 neighbors Manager 5-5
ip preserve (Command file entry; not a CLI command.) n/a 5-27
ipv6 enable VLAN Config 4-6
*A link-local address in these commands must include %vlan< vid > as a suffix. For example,
fe80::110:252%vlan20.
xiii