HP ProCurve Series 6120 Blade Switches Advanced Traffic Management Guide

6-14
Converged Enhanced Ethernet on the HP ProCurve 6120XG Switch
Data Center Bridging Exchange
To display DCBX exchange information about a remote peer device, enter this
command.
Figure 6-7. Example of LLDP Information for a Remote Device with DCBX Enabled
To display DCBX exchange information about a local peer device, enter this
command.
Syntax: show lldp info remote-device dcbx <port-list>
Displays DCBX information for the ports specified on the remote
peer device.
Syntax: show lldp info local-device dcbx <port-list>
Displays DCBX information for the ports specified on the remote
peer device.
ProCurve(config)# show lldp info remote-device dcbx 1
Port 1:
Neighbor Data
ETS Willing : Yes
Max TCG Supported : 4
TCG ID Bandwidth
-------- + ------------
1 20
2 50
3 30
4 0*
* Strict priority
PFC willing : Yes
Max TCG with PFC Enabled : 1
Priority PFC TCG ID
--------- + ----------- ------
1 Enabled 2
2 Disabled 1
3 Enabled 2
4 Disabled 3