HP ProCurve Series 6120 Blade Switches Advanced Traffic Management Guide

6-13
Converged Enhanced Ethernet on the HP ProCurve 6120XG Switch
Data Center Bridging Exchange
Figure 6-5. Configuring the Application FCoE Priority
Displaying DCBX Status Information
To display a list of the TLVs being advertised for the ports, enter the show lldp
config <port-list> command.
Figure 6-6. Displaying the TLVs Being Advertised for a Port
fcoe: Configure FCoE options.
priority <0-7>: Specify a priority that will be advertised for the
FCoE application.
ProCurve(config)# lldp dcbx application fcoe 4
ProCurve(config)# show lldp config 10
LLDP Port Configuration Detail
Port : 10
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False
TLVS Advertised:
* port_descr
* system_name
* system_descr
* system_cap
* capabilities
* network_policy
* location_id
* poe
* macphy_config
* poe_config
* dcbx
IpAddress Advertised:
Advertised TLVs, including the DCBX TLV