HP ProCurve Series 6120 Blade Switches Advanced Traffic Management Guide

5-71
Quality of Service (QoS): Managing Bandwidth More Effectively
QoS Queue Configuration
Changing the Number of QoS Queues
If the number of queues is changed for the switch, all user-defined traffic
templates are removed. When the system reboots, the default traffic template
is applied to the switch. For example, if you are changing from the current
number of queues configured to an 8-queue configuration, enter the command
shown in Figure 5-37.
Figure 5-37. Example of Output when Changing the Number of Queues
Displaying the QoS Queue Configuration
To display information about the QoS configuration, including the applied
traffic template, enter the show qos queue-config command.
Figure 5-38. Example Showing the Current QoS Queue Configuration
ProCurve(config)# qos queue-config 8-queues
CAUTION:
This command will result in deletion of all configured
traffic templates This command will modify the current
running configuration, execute a ‘write memory’ to replace
the startup configuration, then reboot. Any previously
configured ‘bandwidth-min output’ settings will be removed.
Do you want to save the current configuration? [y/n] y
ProCurve# show qos queue-config
Outbound Port Queue Configuration
802.1p
Queue Priority
----- --------
1 1,2
2 0,3
3 4,5
4 6,7
Traffic Template Name: default-tcgt