HP ProCurve Series 6120 Blade Switches Advanced Traffic Management Guide

5-49
Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Classifiers To Configure Quality of Service for Outbound Traffic
3. Configure the DSCP policy by using qos dscp-map to configure the priority
for each codepoint. (See “Differentiated Services Codepoint (DSCP) Map-
ping” on page 5-51 for more information.)
4. Configure the switch to assign the DSCP policy to packets from the
specified source-port.
Syntax: interface < port-list > qos dscp < codepoint >
Assigns a DSCP policy to packets from the specified source-
port(s), and overwrites the DSCP in these packets with the
assigned < codepoint > value. This policy includes an 802.1p
priority and determines the packet’s queue in the outbound
port to which it is sent. If the packet leaves the switch on a
tagged port, it carries the 802.1p priority with it to the next
downstream device. (Default: No-override)
Syntax: no interface < port-list > qos
Removes QoS classifier for the specified source-port(s).
Syntax: show qos source-port
Displays a listing of all source-port QoS classifiers currently
in the running-config file.