HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide (XCS 6.200) (5697-7958, February 2009)

When to perform: Any time prior to the upgrade
HP Command View EVA 8.0.1 is required with XCS 6.200. Check the current version and upgrade the
software if necessary.
Table 8 identifies the upgrade paths to HP Command View EVA 8.0.1.
Table 8 HP Command View EVA upgrade paths
Current HP Command View
EVA Version
Upgrade Path
HP Command View EVA 6.0
HP Command View EVA 6.0.1
HP Command View EVA 6.0.2
HP Command View EVA 7.0
HP Command Vi
ew EV A 7.0.1
To upgrade your existing version of HP Command View EVA,
complete the following steps:
1. Un install the existing version of the HP Command View EVA.
2. Install HP Command View EVA 8.0.
3. Upgrade to HP Command View EVA 8.0.1.
HP Command View EVA 8.0 Upgrade to HP Command View EVA 8.0.1
For more inform ation on HP Command View EVA, including the HP Stora geWorks Command View
EVA installation guide and the release notes, d ownload do cumentation from the website listed in
“Required documentation”onpage11.
Upgrading u
sing the typical installation
This proce
dure is for the t ypical HP Command View EVA installation. To use the custom installation
procedure, which provides control over which components are installed, see the HP StorageWorks
Command View EVA installation guide for instructions.
To install the complete software suite:
1. Close all applications running on the management ser ver.
2. Insert th
e installation CD into the drive.
3. Browse to the installation C D.
4. Double-click setup.exe to start the installation.
The Inst
allAnywhere Wizard Welcome window opens.
5. Follow the on-screen instructions to complete the installation.
NOTE:
When SMI- S EVA is installed using the typical installation, a default account for the CIM administrator is
created if an administrator account exists on the management server prior to installation. The default
user name and password i s administrator. If an administrator account does not exist on the management
server prior to installation, the default CIM administrator account is not created during installation. You
must add at least one CIM administrator account to CIMOM after completing the installation. See
“Managing users in SMI-S EVA” in the HP Command View EVA installation guide for more information.
A trust relationship between HP Command View EVA and SMI-S EVA is established automatically when
you in
stall SMI-S EVA. As a result, HP Command View EVA accepts all SMI-S EVA queries.
Verifying the installation
To verify that the software was installed successfully:
HP Stora g eWorks 4x00/6x00/8x0 0 Enterprise Virtual Array updating product software guide (XCS 6.200)
33