HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide XCS 6.110 (5697-6782, June 2007)
Step 7. Entering storage system passwords
Estimated time
to comp lete: 10–15 minutes
NOTE:
• This step is only required if you use password protection on the storage system.
• Whenyouaddasy
stem password to the controller, you must also enable password access in HP
Command View EVA. The two work in conjunction with one another.
XCS 6.000 a n d later supports long passwords of up to 16 characters. The password must meet the
following requirements:
• 8 to 16 characters in length
• Can include upper or lower case letters
• Can in clude numbers 0 - 9
• Canincludethefollowingcharacters:!“#$%&‘()*+,-./:;<=>?@[]^_‘{|}
• Cannot include the following characters: space ~ \
Entering the password on the OCP
Using the following procedure to enter the password on the storage system controllers. The password
can be entere d from either controller.
1. With either of the default menus (Storage System Name or World Wide Name) displayed, press
three times to display System Password.
2. Press
to display Change Password?
3. Press Enter for yes.
The default password, AAAAAA AA ~~~~~~~~ ,isdisplayed.
4. Press
or to select the desired character.
5. Press
to accept this character and select the next character.
6. Repeat the p rocess to enter the remaining password characters.
7. Press Enter to enter the password and return to the default display.
Enabling password ac c ess in HP Command View EVA
Estimated time to complete: 10 minutes
After entering a password on the OCP, you must enable password access in HP Command View EVA. To
enable password access to a storage system, per form the following steps:
1. Start HP Command View EVA in your browser.
2. Click Ag e nt Options in the Session p ane.
The Management Agent Options window opens.
3. Click Storage system password access.
The Storage S ystem Password Access window opens.
4. Click Enable.
TheEnablePasswordAccesstoaStorageSystemwindowopens.
56
Upgrading the Enterprise Virtual Array