8x00 Enterprise Virtual Array Updating Product Software Guide XCS 6.110 (5697-6782, June 2007)

If you are running ISEE, disable it as follows to avoid generating unnecessary alerts during the upgrade:

1. On the management server, open a command window.

2. Enter the following command to stop ISEE:

C:\>DESTA ISEE OFF

3. Enter the following commands to stop and restart WEBES :

C:\>net stop desta_service

C:\>net start desta_service

4. Enter exit.

Step 3. Cleari

ng storage system passwords

Estimated time to complete: 10–15 minutes

If you use passwords on the c ontrollers, use the following procedure to clear them.

NOTE:

When you clea

r a system password on the controller, you must also disable password access to the

storagesysteminHPCommandViewEVA.Thetwoworkinconjunctionwithoneanother.

Clearing the password on the Operator Control Panel (OCP)

Clearing the password requires access to the storage system. The O C P is located on the front of each

controller.

Using the following procedure to clear the password on the storage system controllers. The password

can be cleared from either controller.

1. Press

fourtimestoscrolltotheSystemPasswordmenu.

2. Press

to display Change Password?

3. Press

to scroll to Clear Password.

4. Press

to display Clear Password.

5. Press Enter to clear the password.

The Password cleared messagewillbedisplayed.

The password is cleared. The system automatically returns to the default display (WW I D).

Disabling password access in HP Command View EVA

Estimated time to complete: 10 minutes

To disable password access to a storage system in HP Command View EVA:

NOTE:

YouwillneedtoknowtheWorldWideName(WWN)ofthestoragesystemtodisablepasswordaccess.

1. Start H

P Command View EVA in your browser.

2. Click Ser ver Options in the Session pane.

The Management Server Options window opens.

3. Click S

torage system password access.

Upgrading the Enterprise Virtual Array