8x00 Enterprise Virtual Array Updating Product Software Guide XCS 6.110 (5697-6782, June 2007)

2. Click Yes to run the kit.

The k it does the following:

a. Saves conﬁguration and state data to %SystemDrive%:\WebesBackup,where

%SystemDrive% is the drive where Windows (not ne cessarily WEBES) was installed.

b. Uninstalls the ex isting installation.

c. Installs this version with the same components (SEA or CCAT) that were present b efore.

d. Restores the saved data.

e. Deletes the WebesBackup directory and all of its contents.

Upgrading HP Replication Solutions Manager (optional)

Estimated time to complete: 10–20 minutes

When to per fo

rm: Any time prior to the upgrade

If HP Replica

tion Solutions M anager is installed, you must upgrade it to version 3.0. HP Replication

Solutions M

anager is an optional interface for HP Business Copy EVA and HP Continuous Access EVA.

For install

ation information, see the HP StorageWorks Replication Solutions Manager installation guide.

For general

usage information, see the HP StorageWorks Replication Solutions Manager administrator

guide.See"Required documentation"onpage11.

HP Replication Solutions Manager can be downloaded from the following website:

ttp://h18006.www1.hp.com/products/storage/software/bizcopyeva/index.html

Click Software & drivers.

NOTE:

HP Replication Solutions Manager 3.0 requires JRE 1.5.0_04 and later. Go to the Sun website

ww.sun.

com) and download the require d JRE.

Monitor ing stor age s ystem stability

Estimated time to complete: 25–30 minutes

When to perform: 48 hours b efore beginning the upgrade

The storage system conﬁguration should be stable for 48 hours before beginning the upgrade. Check the

status of the array to ensu re it is stable and then continue m onitoring status until the upgrade begins.

1. Open HP Command View EVA and click the icon of the storage system you want to upgrade.

2. Using HP Command View EVA, examine the controller event log and check for any critical events.

a. Select the icon of the storage system you want to upgrade in the Navigation pane.

b. Click View Events.

TheViewEventswindowopens.

c. Click Controller Event Log.

The Controller Events window opens in a new browser window.

HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array updating product software guide XCS 6.110