8x00 Enterprise Virtual Array Updating Product Software Guide (XCS 6.240)

6. Select Customer Details and enter the following information:

a. Enter your name in Name. This information is required.

b. Enter your e-mail address in E-Mail to receive the completed report. This information is

required. It is not necessary to have an e-mail address connected to the EVA controller.

You should enter the e-mail address where you typically receive e-mail. You can enter

multiple email addresses in E-Mail by separating entries with a semicolon (;).

c. Enter data in the remaining boxes as appropriate. This information is included in the

reports, but is not required.

d. To send your raw data to HP automatically when creating a report, select Automatically

e-mail the collected raw data on completion.

e. Click Next to save and proceed.

NOTE: For information on using Advanced Settings, see the SAN Visibility user guide.

Creating a report

Once you have configured SAN Visibility for data collection, you can create a report. There are

two methods for creating a report:

• Automatically—Automatically e-mails the data to HP when collection is complete. This requires

you to know the SMTP address of your mail server. If you have external e-mail access from

your environment, this is the preferred method.

• Manually—Requires you to manually send the data to HP. If you do not have external e-mail

access, use this method.

Checking and upgrading your SAN infrastructure 19