8x00 Enterprise Virtual Array Updating Product Software Guide (XCS 6.240)

2. Click OK to view the SAN Settings window.

3. Select SAN Settings and enter the following information:

a. Enter a name in SAN Name. You can use the default SAN Name, but HP recommends

that you change it to a name that is meaningful to you. This name is used when generating

reports, so it should be one that is easily recognized as being associated with the SAN

on which data collection will be done.

b. Click Rename.

c. Click Yes to confirm the name change.

d. Select the fabric in the tree view.

e. Enter a name in Component Group Name. You can use the default fabric name, but HP

recommends that you change it to a name that is meaningful to you. This name is used

when generating reports, so it should be one that is easily recognized as being associated

with the fabric on which data collection will be done.

f. Click Rename.

g. Click Yes to confirm the name change.

4. Click Switch Settings and enter the following information:

16 Pre-upgrade tasks