EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Installation Section Page 2
High Availability (HA) configuration (Dual-switch)
The following configuration requires the purchase of an additional switch. It allows the SAN to continue
to function fully even if an HBA, switch, or storage controller fails.
• One Windows 2003 server configured as an EVA management server
• Up to five additional non-management servers
• Two HP StorageWorks A8002A 4Gb PCI-e HBAs per server
• One HP StorageWorks EVA4100 storage system
• Two HP StorageWorks 4/8 Base SAN switches with eight licensed ports each
Additional non-management servers may be added if additional switch port licenses are purchased.
Contact your HP representative for more information.
Installed Software Components
The following is a list of some of the EZPilot software components. All of this software is automatically
installed on Windows sytems (if necessary) by the installation process.
• Emulex Storport Miniport driver
• Sun Java Runtime Environment (JRE) (EVA Management Servers only)
• Microsoft Multipath input/output (MPIO)
• HP MPIO Device Specific Module (MPIO DSM)
• HP Virtual Disk Service (VDS) HW Provider for the EVA (EVA Management Servers only)
• EZPilot SAN Setup Wizard
• EZPilot EVA Setup Wizard (EVA management servers only)
• EZPilot HBA Wizard
• EZPilot Switch Wizard (EVA Management Servers only)
• EZPilot Manager
• HP Command View EVA Software Suite (EVA Management Servers only)
• Adobe Acrobat Reader*
Terminology
The following Emulex and HP terms differ:
• The EZPilot GUI and documentation refer to LUNs (Logical Unit Numbers) as “logical drives”.
Logical drives are synonymous with HP’s terms “virtual disk” or “VDisks”.
• The Emulex phrase “Assigning a host” is synonymous with HP’s phrase “Presenting a host”.
Note: *Acrobat Reader is not automatically installed, but it is contained on the Emulex
Installation CD.