EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 45
Adding a Logical Drive
EZPilot Manager enables you to create a new logical drive. Click New Logical Drive on the Logical
Drive tab to create and assign a logical drive to the selected storage device. The New Logical Drive
button is enabled when there is unallocated space left on the drive.
To create and assign a logical drive:
1. Do one of the following:
• From the Menu bar, click View, then click Storage Devices.
• From the Toolbar, click the Storage View button.
2. From the discovery-tree, select the storage device to which you want to add a logical drive.
3. Select the Logical Drives tab and click New Logical Drive.
Or
Right-click on the selected storage device and select New Logical Drive.
4. The EVA host configuration is automatically determined and updated if necessary. (If you have
not installed a Command View EVA license, the EZPilot EVA Configuration license dialog box
appears. This dialog box is identical to the EZPilot EVA Setup license dialog box. See “To obtain
a Command View License:” on page 5 for information on obtaining and installing a license. Click
Next after choosing a license option.)
The EZPilot Add Logical Drive Wizard Welcome page appears.
Figure 40: The EZPilot Manager Add Logical Drive Wizard
Note: If you did not obtain a Command View license when you installed EZPilot Manager
you will be prompted to obtain one when you attempt to create logical drives. Refer to
“To obtain a Command View License:” on page 5 for instructions.
Note: You must be in storage view to add a logical drive. You cannot add a logical
drive from the host or switch views.