EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 38
The Storage Management Interface area of the General tab displays the following information:
• Name - The name of the storage management interface being used to manage the selected
storage device.
• Version - The version of the of the storage management interface being used.
The Storage Device Summary area of the General tab displays the following information:
• Device Name - The name of the storage device.
• Device Identifier - The storage vendor’s unique device identifier.
• Device Status - The current status of the selected storage device.
• Device Health - The health of the selected storage device. States are healthy, rebuilding, failing
or failed.
• Rebuild Priority - The priority set for rebuilding a failed disk versus handling I/O requests.
• Number of Logical Drives - The number of logical drives currently allocated on the selected
storage device.
• Number of Controllers - The number of controllers installed in the selected storage device.
• Number of Buses - The number of buses (or channels) to the physical disks in the storage
device.
• Capacity - The total storage space on the selected storage device.
• Number of Physical Disks - The total number of physical disks (including spares) installed in the
selected storage device.
• Max. Number of Controllers - The maximum number of controllers that can be installed on the
selected storage device.
• Maximum Slots Per Bus - The maximum number of slots (one per physical disk) available on
each bus.
• Unallocated Space - The unallocated amount of storage space on the storage device.
The Storage Device Controllers area of the General tab displays the following information:
• Controller Identifier - The controller’s unique device identifier.
• Status - The current status being reported by the selected storage device.
• Health - The health of the selected storage device. States are healthy, rebuilding, failing or
failed.
• Number of Ports - The number of FC ports on the controller.
• Number of Logical Drives - The number of logical drives currently allocated on the selected
storage device.
General tab buttons
• Controller Ports - Click this button to view information about a selected controller port. See
“Viewing a Controller’s Port Information” below for more information.
Viewing a Controller’s Port Information
Using the General tab, you can also view a controller’s port information, including the controller port’s
name, identifier, WWPN, Status and so on.
To view a controller’s port information:
1. From the discovery-tree, select a storage device. The General tab is displayed.
Note: Not all of this space is necessarily available to create or expand logical drives.