EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 12
Starting EZPilot Manager
To start EZPilot Manager:
1. On your Management Server’s desktop, click Start.
2. Select Programs>Emulex>EZPilot Manager.
EZPilot Manager starts and the Discovery Information screen is displayed. Storage View is the default
setting the first time you run EZPilot Manager.
If there are no logical drives configured, you will be prompted to configure them. If you want to configure
logical drives now, see “Adding a Logical Drive” on page 45 and begin at step 4. You can also configure
them later if you wish.
Figure 10: EZPilot Manager at startup with no logical drives configured (Storage View.)
Note: If you did not obtain a Command View license when you installed EZPilot Manager
you will prompted to obtain one when you attempt to create logical drives. Refer to
“To obtain a Command View License:” on page 5 for instructions.
Note: The illustrations in this manual are for instructional purposes only. The actual
information displayed by EZPilot Manager may vary.