Medical Archive Solutions User Guide

HPMA User Guide
206
HP Medical Archive
The Server Manager performs the same sequence as the Stop All
command (page 205), then continues to bring down the operating
system. The Server Manager and GUI are closed by the operating
system as part of its shutdown.
Settings in the operating system are used to trigger a reboot, which in
turn restarts the Server Manager application. Server Manager then
restarts the GUI and all services.
Shutting Down the Server
If the server must be powered down for hardware maintenance,
upgrades, or reconfiguration, this command should be used. Similar to
Restart, this gracefully closes services and halts the operating system.
Unlike Restart, this command does not trigger a reboot. The system is
fully halted, requiring a power cycle or hardware reset to restart the
server and operating system.
The Server Manager performs the same sequence as the Stop All
command (page 205), then continues to bring down the operating
system to a halted state. The Server Manager and GUI are closed by
the operating system as part of its shutdown.
When a server is restarted, the Server Manager application is automat-
ically restarted and resumes normal operation, restarting all services.