HP B-series Network Advisor Enterprise, Professional Plus, and Professional 11.1.2 Release Notes (5697-1433, December 2011-includes all 11.1.x versions)

6. Enter > slptool findsrvs service:wbem and press Enter to verify the SLP service
is advertising its WBEM services.
7. Select one of the following options to verify the SLP service is advertising the WBEM SLP
template over its configured client protocol adapters.
• Enter > slptool findattrs service:wbem:http://IP_Address:Port and
press Enter.
• Enter > slptool findattrs service:wbem:https://IP_Address:Port and
press Enter.
NOTE: IP_Address:Port is the IP address and port number that display when you
use the slptool findsrvs service:wbem command.
Enumeration issue with HP StorageWorks 2408 FCoE Converged Network Switch running on
Fabric OS 6.3.x or lower
When Network Advisor manages an HP StorageWorks 2408 FCoE Converged Network Switch
running Fabric OS 6.3.x or earlier, connected to an FDMI enabled CNA, enumeration instance
fails for the following classes:
• Brocade_EthernetPortLANEndPoint
• Brocade_EthernetAdminDomainHostedLanEndPoint
• Brocade_EndpointOfNetworkPipe Brocade_LANEndpoint
• Brocade_EthernetSwitchHostedLANEndPoint
• Brocade_InEthernetLogicalNetwork
• Brocade_PlatformHostedLANEndPoint
Instance class key property with special character
Getinstance operation fails if the key property value contains either a semicolon or a
non-printable character.
FC port type value for imported HBAs
Brocade_topologyview.AntecedentFCPortType property value corresponding to the
imported HBA is shown as L_Port.
Migration Issue
Properties configured in the SMI Agent Configuration Tool do not migrate from DCFM 10.4.0
(Solaris) to DCFM 10.4.0 (Windows) through the Copy Data and Settings screen when migrating
from DCFM 10.4.0 (Solaris) to DCFM 10.4.0 (Windows) to Network Advisor 11.1.0 (Windows).
Documentation Updates
For the most recent Network Advisor documentation, visit the following HP website: http://
h18006.www1.hp.com/products/storageworks/dc_fabricmgr/index.html.
Under Support, select HP Support & Documents, and then select Manuals.
HP Network Advisor 11.1.0 fixes
Table 7 (page 18) lists the closed defects for this release.
Migration and upgrades 17