HP B-series Network Advisor Enterprise, Professional Plus, and Professional 11.1.2 Release Notes (5697-1433, December 2011-includes all 11.1.x versions)
FTP Transfer Failure
FTP transfers fail when transferring from the Network Advisor Support Repository dialog to a
Cerberus FTP Server and an AIX built-in FTP Server.
Startup time
Network Advisor server startup and restart can take up to 10 or so minutes to complete.
Linux OS: SMC–Restarting services after enabling SSL from Options Dialog in RedHat Linux 5
When the setting of SSL fails from the Options dialog box, follow the steps to enable SSL:
1. Close the client.
2. Stop the services from SMC.
3. Launch the Configuration wizard again and enable SSL from the wizard.
4. Close and launch SMC again.
5. Start services from SMC.
6. Launch the client.
Support Saves may take a long time with large databases
As databases grow larger from Event, sFlow, and Performance Collector data, the support save
operation may take a long time to run. Larger databases promote longer support save operations.
Make sure you have a minimum of 20–GB disk space for support save and backup operations.
Table 5 Performance Counter calculation formulas
FormulaSource valueProtocol
used
TypeCounter Name
TX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
.1.3.6.1.3.94.4.5.1.6SNMPFCTX
RX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
.1.3.6.1.3.94.4.5.1.7SNMPFCRX
TX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
.1.3.6.1.2.1.31.1.1.1.10SNMPGETX
RX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
.1.3.6.1.2.1.31.1.1.1.6SNMPGERX
TX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
.1.3.6.1.2.1.31.1.1.1.10SNMPFCIPTX
RX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
.1.3.6.1.2.1.31.1.1.1.6SNMPFCIPRX
TX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
PortRX (variable from the return
html file)
HTTPEE
Monitors
TX
RX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
PortTX (variable from the return
html file)
HTTPEE
Monitors
RX
TX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
N/AHCM APIHBA, CNATX
RX = (Delta value1 / (1000 * 1000)) /
(Polling interval2/1000)
N/AHCM APIHBA, CNARX
TX = (Delta value1 / 1000) / (1000 *
1000)
. 1.3.6.1.2.1.2.2.1.11 +
.1.3.6.1.2.1.31.1.1.1.2 +
.1.3.6.1.2.1.31.1.1.1.3
SNMPTETX
RX = (Delta value1 / 1000) / (1000 *
1000)
. 1.3.6.1.2.1.2.2.1.17 +
.1.3.6.1.2.1.31.1.1.1.4 +
.1.3.6.1.2.1.31.1.1.1.5
SNMPTERX
12