HP B-series Fabric OS 7.1.0c Release Notes (5697-2892, October 2013 - includes all 7.1.0x versions)

Table 9 Fabric OS 7.1.0 closed defects (continued)
SolutionClosed defect summary
Create and push the "LSAN" zone configurations manually
without multiple scripts.
are run to create and push the "LSAN" zone configuration,
an HA Failover of a director, or reboot of a switch may
result.
Fixed in Fabric OS 7.1.0.
Fixed in Fabric OS 7.1.0.HA Failover of a switch may occur when running IP over
FC with multi-frame sequences.
Fixed in Fabric OS 7.1.0.FDISC ACC is not being properly translated on AG.
Fixed in Fabric OS 7.1.0.IPv6 encryption group connectivity fails with key vaults.
Fixed in Fabric OS 7.1.0.User may not get all the FCIP ISL link information in the
ConnUnitLinkTable.
Fixed in Fabric OS 7.1.0.When a non-decryptable DF mode tape is processed by
the encryption switch, it can cause a
DECRYPT_DECOMPRESS timeout/failure, which in some
instances can cause other tape jobs to fail. In the most
serious case, the HP Encryption SAN switch or the HP DC
Switch Encryption FC Blade will fault, aborting all tape
jobs.
Fixed in Fabric OS 7.1.0.A WWN mapped to a port group from Web Tools is being
mapped to a port. An erroneous information message is
displayed while mapping a WWN to a port group after
removing the WWN's primary and secondary mapping.
Fixed in Fabric OS 7.1.0.Users will not see the correct WWN when rLIRFabricWwn
is queried through SNMP.
Fixed in Fabric OS 7.1.0.The ipfilter counters do not account for IPv6 statistics:
ipfilter showcounters displays the bandwidth
statistics for IPv4 but not for IPv6 and ipfilter
clrcounters clears statistics for IPv4 but not for IPv6.
Fixed in Fabric OS 7.1.0.Wildcard-matched ports inconsistent with manually-allowed
ports for DCC policies. For example, if the
secpolicycreate command with a range is executed
in a switch having a broken port range (such as 16-21,
48-63) policies will be created for all the port numbers,
including the missing ports.
Fixed in Fabric OS 7.1.0.ACL policy is ignored with HBA hardware-based trunking.
Fixed in Fabric OS 7.1.0.The nsinfo.html for the switch may not be updated
with devices that have been removed from an LSAN zone.
Fixed in Fabric OS 7.1.0.An SNMP Internal SCN reports a queue full message
“MQ-100”5 from the HP 4/256 SAN Director running
FOS v6.4.0c1.
Fixed in Fabric OS 7.1.0.The passwddefault and distribute do not remove the
associated authorized_keys file.
Fixed in Fabric OS 7.1.0.User may see a RASLOG about failover when an N-Port
that is not the N-Port for the configured F-Ports is enabled.
However, no failover actually occurs.
Fixed in Fabric OS 7.1.0.A TPERF session may not be able to be restarted until all
user-disabled GE ports on the test tunnel are re-enabled.
Fixed in Fabric OS 7.1.0.The LUN State may be shown as "Re-key pending (Unable
to start because of critical error)" after replacing an HA
member + failover.
42