HP B-series Fabric OS 7.1.0c Release Notes (5697-2892, October 2013 - includes all 7.1.0x versions)

Table 9 Fabric OS 7.1.0 closed defects (continued)
SolutionClosed defect summary
Fixed in Fabric OS 7.1.0.Unconnected ports randomly go into a disabled state after
an HA failover on high port count directors.
Fixed in Fabric OS 7.1.0.Continuous HP EVA Command View probe commands
result in "Operation failed: Requested object doesn't exist",
"Operation failed: Unknown Error" and "Operation timed
out. EE(s) is busy" for cryptocfg --show -container
–stats.
Fixed in Fabric OS 7.1.0.An incorrect value is displayed in the speed column of
switchshow.
Fixed in Fabric OS 7.1.0.The cryptocfg --zeroizeEE does not clear the DEK cache
from the Encryption Engine.
Fixed in Fabric OS 7.1.0.With the CS_CTL bit being set properly, data is not
traversing the correct FCIP H/M/L QoS connection.
Fixed in Fabric OS 7.1.0.FastWrite is clearing the F_CTL priority bit resulting in
CS_CTL values not being maintained/used.
Fixed in Fabric OS 7.1.0.The snmpconfig --set snmpv3 command shows
incorrect default values.
Fixed in Fabric OS 7.1.0.Log rotation to include default.log file or eliminate it
on the BP of a HP Encryption SAN Switch/ HP DC Switch
Encryption FC Blade.
Workaround prior to upgrade:The HP SN8000B 16Gb 32-port Fibre Channel Blade fails
POST (FAULTY-51).
Power cycle the blade or the chassis.
Fixed in Fabric OS 7.1.0.
Fixed in Fabric OS 7.1.0.The CEE command reference guide is missing operands
in show running-config command.
Fixed in Fabric OS 7.1.0.Parity errors detected on HP 2408 FCoE Switch switch
during supportsave collection.
Fixed in Fabric OS 7.1.0.The HP 2408 FCoE Switch stops passing IP traffic upon
upgrading from Fabric OS 6.3.2d to 6.4.2.
Fixed in Fabric OS 7.1.0.Invalid message is preceded by a comma , in the
Network Advisor master log.
Fixed in Fabric OS 7.1.0.When running traffic across a core blade, out-of-order
frames (OOO) are displayed when a core blade is
removed or inserted with the Lossless feature enabled.
Fixed in Fabric OS 7.1.0.Some instances of swFwThLevel appear as a default even
after fwsettocustom is executed for VE ports.
Workaround prior to upgrade:Executing CMSH through telnet or SSH causes a switch
panic on the HP 2408 FCoE Switch.
Telnet/SSH from same subnet or connect from the console.
Fixed in Fabric OS 7.1.0.
Fixed in Fabric OS 7.1.0.Compact Flash became 100% full on an HP Encryption
SAN Switch after switch panic.
Fixed in Fabric OS 7.1.0.There is missing information from the display -
swIPv6ChangeTrap doesn't have the description of
"swTestString = STRING: testTrap".
Workaround prior to upgrade:After downgrading from Fabric OS 7.0.0 to 6.4.x, a route
rebalance or recalculation will cause some ICL paths to be
blocked.
Disable all ICL ports and then enable all ICL ports.
48