HP Brocade Host Bus Adapters and Driver Installation Guide (AA-RWQ0D-TE, March 2012)

hp_rescan
The hp_rescan command rescans LUNs on HP supported Fibre Channel adapters.
Table 4 hp_rescan options
Rescans all adapters.–a
Prints help message.–h
Rescans a specific adapter instance. The specific device should be a SCSI host number such as 0 or 6.–i
Lists all FC adapters.–l
HBA management software
Use Brocade HCM to configure, monitor, and manage your HBAs. Depending on your operating
system, you can install and run HCM locally or on a remote server.
Install and run HCM from a remote serverInstall and run HCM locallyOperating system
YesYesWindows
YesYesLinux
YesNoCitrix
YesNoVMware
For more information about HCM, see the online help or the Brocade Fibre Channel HBA
Administrator’s Guide available at the HP Manuals website:
http://www.hp.com/support/manuals
Under storage, click Storage Networking, and then under Host Bus Adapters, select your adapter.
HBA management software 17