HP StorageWorks EVA4100 SAN Starter Kit Release Notes (5697-6819, July 2007)

Compatibility/interoperability
Supported components
Table 4 identifies the hardware and software components supported by the EVA4100 SAN Starter Kit.
Table 4 Supported components
Component
Required model/version
HBA
HP StorageWorks FC2142SR 4Gb PCI-e HBA (LPe1150)
HBA driver
• Windows: a
ppropriate version installed automatically by EZPilot
• Red Hat Ent
erprise Linux 4 and SUSE Linux Enterprise Server 9:
8.0.16.3
2
• SUSE Linu
x Enterprise Server 10: 8.1.6.8
HBA firmwar e
2.50a6
Fibre Channel switch
HP StorageWorks SAN Switch 4/8 base FOS 5.1 or later
EVA4100 c
ontroller firmware
XCS 6.110
Management ser ver operating
system
• Windows Server 2003 SP2
• Windows Server 2003 x64 SP2
Non-management server
operating system
• Windows Server 2003 SP2
• Windows Server 2003 x64 SP2
• Red Hat Enterprise Linux 4 (latest update)
• SUSE Linux Enterprise Server 9 (latest service pack)
• SUSE Linu x Enterprise Server 10 (latest service pack)
HP Command View EVA
1
7.0
EVA VDS Provider
1
4.01.03
1
These components are installed automatically by EZPilot.
iSCSI support
EZPilot does not not install or manage the EVA4100 iSCSI Connectivity option. For more information, see
the iSCSI Connectivity documentation.
Important notes and workarounds
Do
not run EZPilot Manager and HP Command View EVA concurrently. Doing so can cause inaccurate
di
scovery information to be displayed.
During installation, references to the EVA 4000 can refer to an EVA4100.
If you have difficulty with the EZPilot installation, see the Emulex EZPilot User Manual for troubleshooting
information.
For additional notes and workarounds for the EVA4100, see the HP StorageWorks 4x00/6x00/8x00
E
nterprise Virtual Array release notes.
HP StorageWorks EVA4100 SAN Starter Kit release notes
7