HP StorageWorks EVA4100 SAN Starter Kit Quick Installation (5697-6725, July 2007)

2. Repeat Step 1 to enter the r emaining characters.
3. Press Enter to accept the WW N and select the checksum entry
mode.
4. Verify that the initial WWN checksum displays 0 in both positions.
5. Press
or until the first checksum character is displayed.
Press
to acce
pt this character and select the second character.
6. Press
or until the second character is displayed. Press Enter
to accept the checksum and exit.
Section 7. O
btaining an HP Command
View EVA license
HP recommends that you obtain the license key from the HP Webware
website. See your License Entitlement Certificate for other options to
request a license key if you are unable to use the online option.
NOTE:
If the Windows management server has Internet access, you
canobtainalicensekeyduringinstallationoftheEZPilot
management software See Section 8. The installation procedure
includes a link to the HP Webware website in the EVA Setup
license options window.
To obtain a license key fr om HP Webware:
1. Go to h
ttp://webware.hp.com and click Generate license(s) under
Webware licensing.
2. Obtain the HP order number from the License Entitlement Certificate,
enter it in t he Order number box, and then click Next.
Based on information obtained from the order, a list of available
products appears on the Product selection window.
3. Select the product identified on your License Entitlement Certificate
from the product list, and then click Next.
The Order product(s) detail window opens.
4. Enter the following information:
•TheNumber of LTUs listed as Quantity Ordered o n your License
Entitlement Certificate (typically 4)
•TheWWN for the array
Use the W W N value that you entered in Section 6.Usethe
exact format displayed in the OCP (xxxx-xxxx-xxxx-xxxx [19
alphanumeric characters including dashes]).
If you are obtaining the license key during EZPilot installation,
you can copy the WWN from the EZPilot EVA Setup license
options window and paste it into the web browser.
Click Next.
The Members sign-in window opens.
5. Enteryourinformation:
• If you registered previously, enter your email address and
password in the Existing members box, and then click Sign-in.
• If you did not register previously, enter your email address,
create a password, and then reenter your password in the First
time users box. Click Sign-in.
The Address Information window opens.
6. Complete the requested information.
If you are the license owner, select the IamtheLicenseownerbox.
•Ifyouregisteredpreviously,License owner (End-User) information
automatically populates.
• If you did not register previously or if you did not select the Iam
the License owner box, enter your contact information under
License owner (End-User) information.
Click Next.
The License certificate p age appears.
7. Click the link on the certificate page to save the license
key/password file in the format filename.dat.
8. Save the licence key/password
file to a location of your choice.
You will use it in Section 8.
9. Exit the web browser.
Prerequisites for installing EZPilot
Before installing the EZPilot software, ensure the following conditions
are met:
• Record the switch IP address, gateway, and subnet mask. You will
use this i
nformation during installation.
• Remove an
y Emulex, Brocade, or HP StorageWorks software
currentl
y installed on the server.
Section 8. Installing Emulex EZPilot on
the Windows management server
There must be only one Windows management server connected to the
EVA4100. During the installation, the SAN components are configured
and the EVA4100 is initialized. For more information on EZPilot, see
the Emulex EZPilot User Manual.
To install Emulex EZPilot Manager and HP Command View EVA on
a Windows management server:
1. If you did not save the license key/password file on the ser ver
or on a networked drive mapped to the server, copy the license
key/password file generated in Section 7 to the management server.
2. Insert the EZPilot Windows Installation CD into the drive on the
Windows server you will use as the management ser ver.
TheservermustberunningWindowsServer2003SP2.
3. After the file is verified, the EZPilot dialog box opens. Click Next.
The Installation options window opens.
4. Select the HP EVA Management Server box, and then click Install.
5. Follow the on-screen instructions to install the EZPilot management
software.
Section 9. Installing EZPilot on a
Windows non-management server
You must install the EZPilot software on all Windows non-management
servers connected to the EVA4100.
1. Insert the EZPilot Windows Installation CD into the drive on the
Windows non-management server.
The server must be running Windows Server 2003 SP2.
The EZPilot d ialog box opens.
2. Click Next.
The Installation Options dialog box op ens.
3. Click Install.
Do not select the HP EVA Management Server box.
4. Follow the on-screen instructions to install the non-management
software.
Repeat this procedure to install EZPilot on all Windows non-management
servers connected to the EVA4100.
Section 10. Creating logical drives using
EZPilot Manager
To make the
EVA4100 storage available to your servers, you must create
logical d
rives and assign them to the appropriate host. This is done
using EZPilot Manager. For complete information on creating logical
drives, see the Emulex EZPilot User Manual.
NOTE:
You must install the Emulex driver and utilities on any Linux
servers connected to the EVA4100 to make them visible to
EZPilot Manager and to assign logical drives to your Linux
servers (see Section 11).
1. On your Windows management server, click Start.
2. Select All Programs > Emulex > EZPilot Manager Utility.
EZPil
ot Manager launches, displaying the Discovery In formation
scree
n.
3. If th
ere are no logical drives on the EVA4100, you will be prompted
to cr
eate them with the EZPilot Add logical Drive Wizard. Click Yes.
4. Sele
cttheLogicalDriveTypeyouwanttocreate,assignasize,and
opt
ionally a name to the new logical drive, and then click Next.
The
Logical Drive Host Assignment dialog box opens.
5. Sel
ect the host (and its adapters) to which you want to assign the
logical drive. If Assign to this host only is selected, only
the local host and its adapters are displayed. Typically, a logical
drive is assigned to only one host. Click Next.
The Logical Drive Initialization and Volume Access dialog box
opens.
6. You can optionally format the drive and assign a drive letter or
mount directory, and then click Next.
TheLogicalDriveCreationdialogboxopens.
7. To create the logical drive, verify the logical drive parameters, and
then click Create Logical Drive.
8. When the creation is complete, click Next.
The Finish window opens.
9. To create an additional logical drive, click Next,andthenrepeat
Step 4 through Step 8.
10. When you are finished creating logical drives, clear the Create
another logical drive box, and then click Finish.
Section 11. Installing the Emulex driver
and utilities on a Linux non-management
server
This section applies only if you are connecting Linux servers to the
EVA4100. A Linux non-management server must be running one of the
following Linux versions:
• Red Hat Enterprise Linux 4 (latest update)
• SUSE Linux Enterprise Server 9 (latest service pack)
• SUSE Linux Enterprise Server 10 (latest service pack)
For complete instructions on installing the Emulex drivers and utilities
for Linux, see the documentation on the Emulex Linux Installation CD
included in the HP EVA4100 SAN Starter M edia kit.
To create a Linux non-management server:
1. Ensure a supported version of the Linux operating system is installed
on the server.
2. Update with the ProLiant Support Pack (for HP servers).
3. Install the Emulex driver for Linux.
4. Install the Emulex HBAnyware utility to configure the HBAs with the
correct firmware/BIOS.
5. Install the Emulex MultiPulse utility on your system to a llow for
multipathing in a High Availability (HA) environm ent.