EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 32
Figure 26: The EZPilot Firmware Download dialog box
4. Navigate to the extracted firmware/BIOS file you wish to download to the HBA. Select the
firmware/BIOS file and click Start Download. A status bar displays the progress of the
download and indicates when the download is complete. After the firmware/BIOS is
downloaded, the HBA is automatically reset.
5. Click Close. The Maintenance tab displays the updated firmware/BIOS information for the
selected HBA.
If you are updating the firmware/BIOS on a dual-channel HBA, repeat steps 1 through 5 to update the
firmware on the second port.
Enabling or Disabling BootBIOS on an HBA
Use the Maintenance tab to enable or disable the selected HBA’s BootBIOS.
To enable or disable BootBIOS:
1. In the discovery-tree, select the HBA whose BootBIOS you wish to enable or disable.
2. Click the Maintenance tab.
3. Click Disable or Enable as appropriate.
Note: You do not need to enable BootBIOS if it was enabled at the time of
shipment.