EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 26
Viewing Target Information
Selecting an unmanaged target (for example, a tape device) or selecting a controller port under a
storage device in Host or Switch views displays the Target Information page.
Figure 22: The Target Information page
The Target Information page displays the following information:
• FC ID - The FC identifier for the target which is assigned automatically in the firmware.
• SCSI Bus Number - The SCSI bus to which the target is connected.
• SCSI Target Number - The SCSI target number assigned to the selected target.
• Node WWN - The node World Wide Name of the selected port.
• Port WWN - The port World Wide Name of the selected port.
• OS Device Name - The name assigned by the operating system to the selected port (if
available).
To view target information:
1. Select Host or Switch view.
2. From the discovery-tree, select the target whose information you wish to view.