EMULEX EZPilot EVA Version 2.0 User Manual (5697-6961, July 2007)

EZPilot - Management Section Page 25

Right-click on the selected logical drive in the discovery-tree and select Expand.

The Expand Logical Drive dialog box appears.

Figure 21: The Expand Logical Drive dialog box

3. Enter the amount to increase the storage capacity on the drive. The maximum expansion

amount is displayed on the dialog box. The units drop down box next to the Enter Expansion

Amount field can be used to change the size units. The size can be displayed in gigabytes or

terabytes (if more than 1 terabyte is available). Click OK.

4. A dialog box appears informing you that the logical drive was expanded. Click OK.

Note: If there is already a file system defined on the logical drive, expanding the logical

drive will not expand the file system. You must use a disk management tool to expand

the file system after the logical drive is expanded.

Note: It may take several minutes for the new logical drive size to appear on the Logical

Drive Summary page.