HP PCIe IO Accelerator for ProLiant Servers

Appendix C: Utilities Reference 38
 Internal temperature (avg. and max., since driver load) in degrees Centigrade
 Board temperature, in degrees Centigrade
 Internal voltage, avg. and max.
 Auxiliary voltage:, avg. and max.
 Health status: healthy, nearing wearout, write-reduced or read-only
 Percentage of good blocks
Basic Information: If no options are used with
fio-status, the following basic
information is reported:
 Number and type of boards installed in the system
 Attach status
 Product name
 Product number
 Firmware version
 Size of the device, out of total capacity
 Internal temperature (avg. and max., since driver load) in degrees Centigrade
 Health status: healthy, nearing wearout, write-reduced or read-only
Data Volume Information: If the -d option is used, the following basic information is
reported in addition to the basic information:
 Physical bytes written
 Physical bytes read
Error Mode Information: If the driver is in minimal mode, read-only mode, or write-
reduced mode when fio-status is run, the following differences occur in the output:
 Attach status is "Status unknown: Driver is in MINIMAL MODE:"
 The reason for the minimal mode state is displayed (such as “Firmware is out of date.
Update firmware.”)
 "Geometry and capacity information not available." is displayed.
 No media health information is displayed.