HP PCIe IO Accelerator for ProLiant Servers

Appendix C: Utilities Reference 37
-f Scan every device in the system
-i Print the device serial number.
-r Force the link to retrain
-v Verbose: Print extra data about the hardware.
-y "Yes" is forced when user is asked to continue.
fio-status
Description
Provides detailed information about the PCIe IO Accelerator board(s) installed. This
utility operates on either fctx or fiox devices. The utility depends on running as root
and having the driver loaded. If no driver is loaded, a smaller set of status information
is returned.
fio-status provides information about any installed PCIe IO
Accelerator devices.
Syntax
fio-status <device> [-c, -d, -a, -h, -v]
where <device> is the name given by the PCIe IO Accelerator driver to your device.
This name is
/dev/fctx, where x indicates the device number. (The number reflects
the PCIe bus for the PCIe IO Accelerator.) For example, the name
/dev/fct4 refers to
the PCIe IO Accelerator installed in PCIe Bus 4 in your system. (
fio-status displays
this number.)
Options
-c Count: Report only the number of PCIe IO Accelerators installed.
-d Show basic information set plus the total amount of data read and written
(lifetime data volumes). This option is not necessary when the -a option is used.
-a Print all available information for each device. The following information is
reported:
 Number and types of boards installed in the system
 Attach status
 Serial number
 Part number
 Manufacturer's code
 Manufacturing date
 Firmware version
 Size of the device, out of total capacity
 Low-level format GUID
 PCIe information, including the bus ID, vendor ID, device ID, and PCI slot number