HP PCIe IO Accelerator for ProLiant Servers User Guide

Introduction 9

IO Accelerator Duo

capacity

320GB 640GB

512B

packet size)

Access latency 26 μs (read) 29 μs (read)

*Performance achieved using multiprocessor enterprise server

• Enterprise data integrity

• Field upgradeability

• Green footprint, 7.5 watts nominal per device

NOTE: MSI was disabled to obtain these statistics.

Packing list

• PCIe IO Accelerator Solid State Storage Device

• HP PCIe IO Accelerator for ProLiant Servers installation instructions

• PCIe IO Accelerator half-height bracket (used on low-profile systems)

Required operating environment

The HP PCIe IO Accelerator is supported for use in the following operating environments:

• Red Hat Enterprise Linux 4 (AMD64/EM64T)

• Red Hat Enterprise Linux 5 (AMD64/EM64T)

• Red Hat Enterprise Linux 6 (AMD64/EM64T)

• SUSE LINUX Enterprise Server 10 (AMD64/EM64T)

• SUSE LINUX Enterprise Server 11 (AMD64/EM64T)

• Windows Server® 2003 (x86_64-bit only) SP2

• Windows Server® 2008 (x86_64-bit only) R1 with SP2 or higher

• Windows Server® 2008 (x86_64-bit only) R2

• VMWare ESX 4.0 Update 1

CAUTION: Version 2.2 of the driver software is not backward-compatible with any previous

driver version. When you install version 2.2, you cannot revert to any previous version.

IMPORTANT: All operating systems must be 64-bit architecture.

NOTE: IO Accelerators cannot be used as hibernation devices.