HP 3PAR T-Class Installation and Deinstallation Guide

3. Set up the time zone for the operating site as follows:
a. Select a location from the list, type the corresponding number <N> , and press ENTER.
b. Select a country, type the corresponding number <N> , and press ENTER
c. Select a time zone region, type the corresponding number <N> , and press ENTER.
d. Verify the time zone settings are correct, type 1 , and press ENTER.
NOTE: The system automatically makes the time zone change permanent. Disregard
the instructions on the screen for appending the command to make the time zone change
permanent.
4. Press ENTER to accept the default time and date, or type the date and time in the format
<MMDDhhmmYYYY>, where M,D, h, m, and Y are the current month, day, hour, minute, and
year, respectively, and then press ENTER.
Current date according to the system: <date_and_time>
Enter dates in MMDDhhmmYYYY format. For example, 031822572008 would be March 18,
2012 10:57 PM.
Enter the correct date and time, or just press enter to accept the date shown
above.=> <enter>
(...)
Is this the desired date? (y/n) y
To confirm the date setting, type y and press ENTER.
5. Name the storage system using up to 31 alphanumeric characters. Type yes and press ENTER
to confirm the name.
NOTE: The system name can only include letters, numbers and the special characters “.-_”,
(dot, hyphen, underscore) and can be no more than 31 characters long. The first character
must be a letter or number.
Enter the InServ system name ==> < system name >
Cluster will be initialized with the name < system name >
IS THIS THE CORRECT NAME? yes/change ==> yes
Cluster is being initialized with the name < system name >
...Please Wait...
6. Verify the InForm OS version is correct. Type C and press ENTER to continue.
Please verify your InForm OS versions are correct.
Release version 3.1.1.226
Patches: None
Component Name Version
CLI Server 3.1.1.xxx
CLI Client 3.1.1.xxx
System Manager 3.1.1.xxx
Kernel 3.1.1.xxx
TPD Kernel Code 3.1.1.xxx
Enter < C > to continue or < Q > to quit ==> c
94 Initializing the Storage System Software