HP 3PAR T-Class Installation and Deinstallation Guide

Consult Table 23 (page 91) to verify proper functioning of the Supermicro II service processor
displays.
Table 23 Supermicro II Service Processor Front-Panel Displays
MeaningAppearanceLED
Indicates the service processor is off.No lightPower
Indicates the service processor is on.Steady green light
Indicates no hard drive activity.No lightHard Disk Drive
Indicates hard drive activity.Flashing amber light
Indicates the port is not connected.No lightNIC Port 2
Indicates that the port is connected.Steady green light
Indicates network activity.Flashing green light
Indicates the port is not connected.No lightNIC Port 1
Indicates the port is connected.Steady green light
Indicates network activity.Flashing green light
Indicates the service processor
temperature is normal.
No lightOverheat
Indicates the service processor has a
failed fan.
Flashing red light
Indicates the service processor
temperature is overheating.
Steady red light
Securing the Storage System
After verifying the storage system is properly functioning , secure the system by closing the rear
door and locking cabinet.
WARNING! Hazardous energy is located behind the rear access door of the cabinet. Use caution
when working with the door open.
Securing the Storage System 91