HP 3PAR T-Class Installation and Deinstallation Guide

Figure 82 Supermicro Service Processor LEDs
Consult Table 22 (page 90) to verify proper functioning of the Supermicro service processor
displays.
Table 22 Supermicro Service Processor LED Displays
MeaningAppearanceLED
Indicates the system is normalNo lightOverheat
Indicates the system is overheatedSteady red light
Indicates no network activityNo lightNIC Port 2
Indicates network activityFlashing green light
Indicates network is linkedSteady green light
Indicates no network activity.No lightNIC Port 1
Indicates network activityFlashing green light
Indicates network is linkedSteady green light
Indicates no hard drive activityNo lightHard Disk
Indicates hard drive activityFlashing amber light
The system is offNo lightPower
Indicates the system is powered onSteady green light
Supermicro II Service Processor
The Supermicro II service processor LEDs are defined in the following section. The LEDs are located
at the top of the service processor (Figure 83 (page 90)).
Figure 83 Supermicro II Service Processor LEDs
90 Understanding LED Status