HP 3PAR T-Class Installation and Deinstallation Guide

Figure 77 Ethernet Adapter LEDs
Consult Table 18 (page 86) to verify the proper functioning of Ethernet adapter LEDs.
Table 18 Ethernet Adapter Indications
MeaningAppearanceLED
Valid link partner.Steady green lightACT/LNK
Data activity.Flashing green light
ACT/LNK is off.No light
1000 Mb/sec mode.Steady yellow lightSpeed
100 Mb/sec mode.Steady green light
10 Mb/sec mode.No light
Power Supply LEDs
Power supply units are located at the rear of all drive cages and controller nodes.
Power supplies have the following LEDs (“Power Supply LEDs” (page 87)):
86 Understanding LED Status