HP 3PAR T-Class Installation and Deinstallation Guide

Inserting the Drive Magazines
To insert the drive magazines:
1. Locate the drive chassis nearest to the bottom of the cabinet and insert the magazine into slot
0 within that drive chassis. Use the notch at the top of the drive bay as a guide while inserting
the magazine (“Inserting a Drive Magazine Into a Drive Chassis” (page 61))
NOTE: For systems that occupy multiple cabinets, drive chassis numbers continue at the
bottom of the next cabinet and progress through the top of the cabinet.
NOTE: See “Drive Chassis Numbering” (page 35) for an explanation of the numbering
system applied to drive chassis and their components.
NOTE: If the drive magazine allocation for this system differs from the standard allocation
pattern, it may be necessary to remove filler panels before installing drive magazines in some
bays. See “Installing Drive Cage Filler Panels” (page 62) for more information.
Figure 51 Inserting a Drive Magazine Into a Drive Chassis
2. With the drive magazine handle in the open (down) position, insert the drive magazine into
the drive bay and push until it stops. Lift the drive handle quickly into the closed (up) position
Unpacking and Inserting the Drive Magazines 61