HP 3PAR T-Class Installation and Deinstallation Guide

1. Use the provided key to unlock the left and right fascia (“Location of Fascia Locks” (page 48)).
Figure 37 Location of Fascia Locks
2. Use a #2 screwdriver to remove the three screws securing each fascia and carefully remove
each fascia from the cabinet.
Locating the Wrist Grounding Strap
To prevent damage from electrostatic discharge, it is necessary to wear an Electrostatic Discharge
(ESD) wrist grounding strap during installation and maintenance of the storage system. Every
cabinet includes a wrist grounding strap secured with a hook and loop fastener in the front of the
cabinet, below the lowest battery tray.
NOTE: If the cabinet has locking fascias, remove the fascias before accessing the bezels. See
“Storage System Fascias” (page 46).
To locate the grounding strap, remove the second bezel from the bottom of the cabinet. To remove
a bezel, use the handle slots located on the sides of the bezel and pull with both hands (Figure 38
(page 49)).
48 Setting Up the Storage System