HP 3PAR T-Class Installation and Deinstallation Guide

1. Use an adjustable wrench and turn clockwise to lower each foot until the weight of the cabinet
rests on the leveling feet instead of the casters (“Lowering a Leveling Foot” (page 46)).
Figure 34 Lowering a Leveling Foot
2. Lock the feet in place by turning the locking nut on each foot counterclockwise until tight with
an adjustable wrench (“Tightening the Locking Nut” (page 46)).
Figure 35 Tightening the Locking Nut
3. Verify the cabinet is stationary.
Storage System Fascias
HP 3PAR cabinets feature removable fascias. The fascias are removable for cable routing and
limiting access to the drive chassis and drive magazines.
Removing Fascias
To remove a side panel:
46 Setting Up the Storage System