HP 3PAR T-Class Installation and Deinstallation Guide

Figure 108 Network and Dial-Up Connections Window
6. Right-click the Local Area Connection icon to bring up the Local Area Connections Properties
menu.
7. Click Properties.
The Local Area Connection Properties dialog box appears.
8. In the Local Area Connection Properties dialog box, double-click Internet Protocol (TCP/IP).
The Internet Protocol (TCP/IP) Properties dialog box appears.
9. In the Internet Protocol (TCP/IP) Properties dialog box, click the Use the following IP address
button and then type the following IP addresses:
Table 28 IP Addresses
10.255.155.49IP address
255.255.255.248Subnet mask
noneDefault gateway
10. Click OK.
11. Click OK in the Advanced TCP/IP Settings dialog box to finish configuring the LAN connection.
Logging in to SPOCC
After the Ethernet connection is configured to the service processor, log in to the Service Processor
Onsite Customer Care (SPOCC) interface from the maintenance PC using a supported Web browser.
SPOCC is one of two service processor user interfaces; SPMAINT is the other. These interfaces
Connecting to the Service Processor 195