HP 3PAR T-Class Installation and Deinstallation Guide

Packing the Storage System in the Type 1 Shipping Container
NOTE: Refer to “Unpacking the Cabinet” (page 42) for information about Type 1 shipping
containers.
1. With at least one person pushing from the rear of the cabinet and a second person guiding
the cabinet from the front, wheel the cabinet to the loading area.
2. Place a pink poly antistatic bag over the storage system. These bags come shipped inside the
wooden crate.
3. Locate the front of the shipping container (“The Front of the Shipping Container” (page 163))
and unlatch the four rotary latches securing the front panel.
Figure 94 The Front of the Shipping Container
To unlatch a rotary latch, raise the lever and turn counterclockwise one half turn, as shown in
“Unlatching a Rotary Latch” (page 164).
Deinstalling the Storage System 163