HP 3PAR T-Class Installation and Deinstallation Guide

16. Place the drive magazine transport container or shipping containers near the storage system.
Before opening the 30–magazine container, secure the wheels on the bottom of the container
by engaging the brakes on the front wheels.
5
To open the container, unlatch the rotary latches by raising the levers and turning them
counterclockwise one half turn (“Unlatching the Drive Magazine Transport Container”
(page 161)).
Figure 91 Unlatching the Drive Magazine Transport Container
CAUTION: The transport container contains ESD-safe materials to prevent damage to disk
drives in transit. Do not use any other container to transport drive magazines.
17. Remove a drive magazine by pulling the drive magazine handle down to disengage the
magazine from the chassis. Then pull the magazine straight out.
18. Load each drive magazine into an ESD bag and then into the transport container.
19. Return the wrist grounding strap to the cabinet and close the rear door of the storage system.
5. For systems shipped internationally and for systems with fewer than 15 drive magazines, the magazines are shipped
in boxes that hold three magazines each.
Deinstalling the Storage System 161