HP 3PAR T-Class Installation and Deinstallation Guide

3. Create a VLUN of the virtual volume for export to the host.
192.168.46.249 cli%
createvlun
test_vv
test_lun_num <hostname>
4. Verify the host can access the VLUN.
5. Repeat step 1 through 4 for each host.
6. From the service processor, type exit to stop the CLI session, then type xand press ENTER
to return to the service processor main menu.
7. Type x and press Enter again to exit service processor maintenance. Type exit and press
ENTER to log off the service processor.
8. Disconnect the Ethernet cable between the service processor and the maintenance PC.
Exporting Test LUNs 153