HP 3PAR T-Class Installation and Deinstallation Guide

X Exit

4. Type 2 to Add a new InServ and press ENTER.

SP - InServ Configuration Manipulation

Enter Control-C at any time to abort this process

1 ==> Display InServ information

2 ==> Add a new InServ

3 ==> Modify an InServ config parameters

4 ==> Remove an InServ

X Return to the previous menu

5. Type the static IP address of the system (InServ) and press ENTER.

SP - InServ Configuration Manipulation

Enter Control-C at any time to abort this process

Please enter the IP address of the InServ you wish to add

-OR -

Enter QUIT to abort:

<static.ip.address>

NOTE: If adding the storage system fails, exit from process and check the SP software version

for compatibility. Update the SP with the proper InForm OS version before adding the system.

Setting up the Service Processor 147