HP 3PAR T-Class Installation and Deinstallation Guide

29. Type the hostname or IP address of the http proxy server and press ENTER.
Please enter the hostname or I/P address of the http proxy server [?]:
<static.IP.address>
30. Press ENTER to accept the default port number or type the port number of the http proxy server
and press ENTER.
What port number should be used on the http proxy server? [default]:
[XXXX]
31. Type no to not require proxy authentication and press ENTER. If you indicated no, skip to step
34.
Type yes to require proxy authentication, press ENTER. and continue with step 32.
Will proxy authentication (id/password) be used? (yes or no) [no]:
yes
32. Type the proxy User ID and press ENTER.
Please enter the proxy user id:
alphanumeric value
33. Type the proxy password for User ID [alphanumeric value] and press ENTER. Retype the
password to confirm and press ENTER.
Please enter the password for id 'alphanumeric value': alphanumeric value
Please re-enter (confirm) the password: alphanumeric value
34. Type yes to confirm that the data is correct and press ENTER.
3PAR Secure Service Policy Manager
- Name/address: <static.IP.address>
- Port: [default] or [XXXX]
- Proxy: http
- Proxy name/address: XX.XXX.XXX.XXX
- Proxy port: [default] or [XXXX]
- Proxy id: [alphanumeric value]
Is this data correct? (yes or no)? [yes]
yes
35. Type the external NTP server address (if applicable) or none and press ENTER.
Network Time Server
Enter Control-C at any time to abort this process
Please enter the I/P address of an external NTP server,
or a blank delimited list if more than one is desired,
or 'none' if there will not be any time server [?]:
122 Initializing the Storage System Software