HP 3PAR T-Class Installation and Deinstallation Guide

16. If you answered no in step 15, type the hostname for an alternate connection server and press
ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the fully qualified hostname for the Connection Server
(use only alpha numeric or . - _)
- or -
QUIT to abort
<server_name.company.com>
17. If the connection portal (CP) does not require connection to proxy services, type no and press
ENTER If you answered no, skip to step 20.
If the CP requires connection to proxy services, type yes and press ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Does the connection to the CP require proxy services? (yes or no) [no]
yes
18. Type the IP address for the connection server and press ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the IP address for <server_name>:
<server.IP.address
>
19. Press ENTER to accept the default router address, or type an alternate router address and press
ENTER.
Please enter the IP address of the router to reach
stdev.3pardata.com, or NONE: [<default.router.address>]
[enter]
20. Type the external NTP server address (if applicable) or none and press ENTER.
Network Time Server
Enter Control-C at any time to abort this process
Please enter the I/P address of an external NTP server,
or a blank delimited list if more than one is desired,
or 'noe' if there will not be any time server [?]:
Enter the IP address of an external NTP server
<NTP.server.address>
Setting up the Service Processor 113